Krueger Pottery Supply is closed Thursday 11.23.23 - Friday 11.24.23. We will reopen Saturday 11.25.23 from 10a-3p.
Have a question or need help?We are open M-F 9a-6p & Saturday 10a-3p CSTVisit our store at 1449 Strassner Dr. Brentwood, Missouri 63144
Welcome to Krueger Pottery Supply!
Replacement bat pin kit. Fits virtually any wheel. Kit includes: Two 1 3/8” Pins, Two 5/8” Pins, Two – Lock Washers, Two – Wing nuts. Stainless steel.
AMACO Decorating Accessories
This white paste is an excellent mending material for bisque that can be used to bond pieces together or fill up broken cavities. Bisque Fix can be colored to match the bisque using metal oxides or ceramic stains. After applying with a spatula, fire to the temperature of the clay and glaze that you are using -- up to Cone 10 (2381°F, 1305°C).Imp...
Dry kiln wash for all temperature ranges. Mix with water and brush on shelves to repel glaze drips. 5Lbs Dry.
Skutt Vents & Accessories
Peter Pugger Accessories
EXTRUSION DIES Peter Pugger is pleased to offer extrusion dies that mount directly to the end of the following Vacuum Deairing Mixing Pugmill models: – VPM-7/7SS – VPM-9/9SS – VPM-20/20SS – VPM-30 – VPM-60 (Mounting Hardware Included)
This syringe-type applicator allows excellent control when applying engobes or casting slips. Snip off end of applicator to adjust for thickness of lines or for consistency of liquid being extruded.
Silicone Carbide Rub Brick for removing glaze drips and kiln wash from shelves. Small size is 3” wide x 6” long and 1” thick.
Mayco Decorating Accessories
Use to mask areas for achieving crisp edge lines and shapes. 6MM wide (.236”)
Composition Wood Cork
These applicators allow the creation of fine or medium lines, dots and letters with Amaco underglazes.
Create an unlimited array of designs utilizing line and dot patterns on ceramic pieces with AMACO underglazes and these applicators. Two needle sizes allow you to make medium or fine lines, dots and letters. They may also be used with certain g...
Red Rubber Stoppers
Giffin Grip and Accessories
The new Giffin Grip Mini! All the quality and reliability you expect from the Giffin Grip only smaller and packed with cool new features.
The Giffin Grip Mini attaches to the wheel head with bat pins (both 6” and 10” wide pin spacing). The Mini is much lower profile than the Model 10 so your trimmings will stay in your splash pan! It also locks...
Plastic caps that fit onto 2oz. Stroke & Coat bottles. No metal tips included. Plastic tips can be cut at various sizes.
4” Bamboo Cane Horseshoe Handle with Top KnotPlease Note: Handle sizes may vary slightly since they are handmade. Handles can be soaked in warm water and bent slightly to fit as needed.
Now Available After over two years of research, development and rigid testing, the New Touchscreen controller is now available on new Skutt KilnMaster (KMT) and GlassMaster Kilns (GMT). This retrofit kit is designed to allow you to easily upgrade a Skutt KM (KilnMaster) kiln to a KMT (KilnMaster Touch) control. Skutt Touchscreen Controller
Pug Cutter The pug cutter is an attachment that provides a convenient means for cutting clay logs into preferred lengths. The pug cutter can easily be mounted to the bosses located on the bottom side of the pugmill nozzle. Once the pug cutter is attached, simple align the cutter to allow clearance for the stainless steel cutting wire and tight...
After a simple one-time adjustment, the Giffin Grip quickly snaps on and off your wheel. It halves the time previously spent in trimming and makes practical trimming shapes that would otherwise have been left untrimmed. Includes 3 short basic sliders, 3 short wide sliders and rod set with new hands.
General duty heat resistant gloves. 14” long, durable coqhide with cloth lining. Good to 250deg. f. Good for removing peep plugs, closing hot kiln lids or removing ware after firing.
Trace designs onto ware or glazed surface. Lines burn away and leave no residue when fired.
Plastic bottle with plastic tip and metal screw on tip. Includes needle to keep tip clog free.
Plastic bottles with plastic tips that can be cut at various lengths for different size openings.
Brass Finish. 3 3/4" long. Shaft is 1 3/4" long x 5/8" diameter.
Adjustable Stand (Pugmill Not Included) This heavy duty stand has two Canadian birch shelves, and multiple mounting holes which allows the stand to be adjusted to a proper ergonomic height. The Adjustable Stand has been designed to work in conjunction with the following models: VPM-7/7SS VPM-9/9SS VPM-20/20SS
Pump has a 5 1/4" long dip tube. Cork is 1.25” at the top and 1.05” at the bottom.
Use to mask areas for achieving crisp edge lines and shapes. 12MM wide (.472”)
4” Square Bamboo Cane HandlePlease Note: Handle sizes may vary slightly since they are handmade. Handles can be soaked in warm water and bent slightly to fit as needed.
Paragon Upgrades and Accessories
FREE Deluxe 18 inch Rolling StandParagon 7-, 8-, 10-, and 12-sided top-loading ceramic and glass kilns now come with a deluxe rolling stand at no extra charge. The new stand has locking casters, a mounting bracket for the Orton Kiln Vent, and a greenware drying rack. You will enjoy the convenience of effortlessly moving the kiln out of the way...
Skutt Element Accessories
KPS Part Numbers 1000111 Skutt Part Numbers 1018Straight pins are used to hold elements in their channels. When you buy new Skutt elements you will receive new pins, but if you have lost pins or have broken brick bricks and need additional pins to hold your elements in place these are the same Skutt pins you get with a new element.
ConeArt Upgrades and Accessories
This unit is the next generation of kiln controllers. It has a modern, intuitive user platform, and touch screen display. The Genesis has different user-interface levels to match the firing knowledge of the user, and a graphical display of the firing’s progress. It is capable of storing up to 12 custom programs with up to 32 segments each, or yo...
PLEASE NOTE: THIS UPGRADE IS AVAILABLE FOR NEW FACTORY KILNS ONLY AND IS NOT SOLD AS A STAND ALONE ITEM.
Sentry 12 Key Controller UpgradeThis kiln can be ordered with the optional Sentry 12-key controller instead of the standard Sentry Xpress 3-key controller. The upgrade price is only for a Sentry 12-key ordered with a new kiln. Controller C...