- Home
- Accessories
Accessories
![Coneart Controller Integrated Orton VentMaster](http://kruegerpottery.com/cdn/shop/products/coneart_ventmaster_cd7f931a-bbb2-4f62-a7da-29494b446011_1024x.jpg?v=1707845253)
Coneart Controller Integrated Orton VentMaster
$646.00 $760.00
Orton Vent Master The Orton Vent Master vents the fumes directly from the kiln before they exit the kiln into the room. This is a very effective venting system which we highly recommend with every kiln. All Vent masters include the main blower and motor ,one three foot high temperature hose,one fume collector cup,hose clamps,instructions and t...
![Brass Spigot – Small](http://kruegerpottery.com/cdn/shop/products/1050090_lg_1024x.jpg?v=1701355714)
Brass Spigot – Small
$22.95
Brass Finish. 3 3/8" long. Shaft is 1" long x 3/8" diameter.
![Soap Pump – Tan with Collar](http://kruegerpottery.com/cdn/shop/products/soapptwc_lg_1024x.jpg?v=1701355690)
Soap Pump – Tan with Collar
$1.85
Collar is 13/16" wide at the base. Pump has a 5 1/4" long dip tube.
![Giffin Grip - Short Blue Basic Slider with Molded Pads, Set of 3](http://kruegerpottery.com/cdn/shop/products/Giffin_Tec-SBBS3_1024x.jpg?v=1666366104)
Giffin Grip - Short Blue Basic Slider with Molded Pads, Set of 3
$29.95
The NEW Short Blue Basic Sliders are a lower profile for trimming closer to the rim of your pot. They can replace the old Blue Sliders that came in your original Giffin Grip purchase. (Not for use with the Giffin Grip Mini)
![Giffin Grip - Model 10 - Clockwise - NON-STANDARD](http://kruegerpottery.com/cdn/shop/products/Giffin_Tec-Giffin_Grip_ff2ba928-e100-44ba-b55c-5d3183b69471_1024x.png?v=1666366084)
Giffin Grip - Model 10 - Clockwise - NON-STANDARD
$249.00
NON-STANDARD CLOCKWISE ROTATION - RARE IN THE USA After a simple one-time adjustment, the Giffin Grip quickly snaps on and off your wheel. It halves the time previously spent in trimming and makes practical trimming shapes that would otherwise have been left untrimmed. Includes 3 short basic sliders, 3 short wide sliders and rod set with new hands.
![Giffin Grip - Center Foam Pad](http://kruegerpottery.com/cdn/shop/products/Giffin_Tec-CFP1_1024x.jpg?v=1666366079)
Giffin Grip - Center Foam Pad
$7.95
Adhesive foam pad for cushioning delicate pieces, like bottle rims etc.
![1 x 3 Inch Glass Viewing Window](http://kruegerpottery.com/cdn/shop/products/paragon_1x3_window_c1912d4a-7d51-4353-8765-7d767ea33bc8_1024x.jpg?v=1665417673)
1 x 3 Inch Glass Viewing Window
$76.24 $84.71
1in x 3in Glass Viewing WindowThe 1" x 3" window is available on the smaller kilns such as the E-9A and Q-11A. Watch the bright red kiln interior through the optional 1” x 3” high-temperature glass window. (Note: always wear firing safety glasses when viewing the kiln interior.) The glass window is guaranteed up to 2300°F. The window is espec...
![Type S Thermocouple Upgrade (Single Zone)](http://kruegerpottery.com/cdn/shop/products/paragon_s-type_tc_a5b0ae17-3d16-4748-8f64-19496ad01592_1024x.jpg?v=1665417635)
Type S Thermocouple Upgrade (Single Zone)
$191.76 $213.07
Type S Thermocouple Upgrade for Single ZoneOptional Type-S premium-grade thermocouple for single-zone 2 1/2" - 3" wall kilns. Ideal for firings above cone 4. It is extremely long lasting even at stoneware temperatures. (This price is for the thermocouple that is factory-installed on your new kiln.)
![Mayco - Large Writer Metal Tip (6 Pack)](http://kruegerpottery.com/cdn/shop/products/ac-227_674ed45f-eeb3-410b-aada-bdaa20696590_1024x.jpg?v=1655581674)
Mayco - Large Writer Metal Tip (6 Pack)
$7.80
Replacement metal tips for writer bottles.
![Giffin Grip - Flex Slider (Set of 3)](http://kruegerpottery.com/cdn/shop/products/Giffin_Tec-Flex_Slider_1024x.jpg?v=1666366080)
Giffin Grip - Flex Slider (Set of 3)
$39.95
For off-centered, asymmetrical and plain old wonky pots. (Not for use with the Giffin Grip Mini)
![Skutt Screw on Connector – Large](http://kruegerpottery.com/cdn/shop/files/1105A25314_web_1024x.jpg?v=1716415937)
Skutt Screw on Connector – Large
$16.10
KPS Part Numbers 1000113 Skutt Part Numbers 1104A25314Screw on element connectors are available in two sizes and are an alternative to crimp on connectors for people who want to make it possible to remove an element without cutting the element pigtail. Screw on connectors were also used on some older model PK kilns. The small element connector f...
![DT2-7 Digital Pyrometer ~ Fahrenheit](http://kruegerpottery.com/cdn/shop/products/paragon_dt2-7_f_0136d18d-7b89-40fe-9923-ce9d85a05a8a_1024x.jpg?v=1665417658)
DT2-7 Digital Pyrometer ~ Fahrenheit
$115.47 $128.30
DT2-7 Digital Pyrometer FarenheitMeasure high temperatures with digital accuracy on a modest budget. The DT2-7 digital pyrometer measures kiln temperature for improved firing results. With the DT2-7 you can fire copper enameling, control the cooling rate of difficult glazes, or know when to begin monitoring glass in a switch-operated kiln. Mon...
![FREE Deluxe 24 inch Rolling Stand](http://kruegerpottery.com/cdn/shop/products/paragon_deluxe_rolling_stand_27eb3484-811f-4814-95b2-4c2a3e7232c7_1024x.jpg?v=1665417633)
FREE Deluxe 24 inch Rolling Stand
$287.71 $319.68
FREE Deluxe 24 inch Rolling StandParagon 7-, 8-, 10-, and 12-sided top-loading ceramic and glass kilns now come with a deluxe rolling stand at no extra charge. The new stand has locking casters, a mounting bracket for the Orton Kiln Vent, and a greenware drying rack. You will enjoy the convenience of effortlessly moving the kiln out of the way...
![Brent Leg Extension Kit](http://kruegerpottery.com/cdn/shop/products/brent_leg_extension_be2be648-b4fe-405e-b280-5e9ef1ae9e28_1024x.jpg?v=1674862597)
Brent Leg Extension Kit
$367.40
Raise your Brent wheel from 31 1/2” up to 42” high with this leg extension kit which fits wheels B, C, CXC or EX.
![Giffin Grip - Pads for Short Sliders, Set of 3](http://kruegerpottery.com/cdn/shop/products/Giffin_Tec-PSBS3_1024x.gif?v=1666366097)
Giffin Grip - Pads for Short Sliders, Set of 3
$6.95
Replacement pads for Short Blue Basic Sliders, and Short Blue Wide Sliders for the Giffin Grip model 10. *Also replacement pads for the Plate Sliders on our Giffin Grip Mini. Sold in sets of 3.
![Giffin Grip - Jumbo Platter Extension with Jumbo Sliders](http://kruegerpottery.com/cdn/shop/products/Giffin_Tec-Jumbo_Platter_Ext_1024x.png?v=1666366089)
Giffin Grip - Jumbo Platter Extension with Jumbo Sliders
$99.00
The Giffin Jumbo Platter Extender fits all Standard Giffin Grips. It increases the size of pots you can trim up to 23 inches in diameter (58.42cm) and is great for items such as platters and large bowls. Include set of 3 Jumbo sliders!
![Shimpo Assorted Die With Bolts for NRA-04/NVA-04S/NVS-07](http://kruegerpottery.com/cdn/shop/files/P-DIE-ASRT-ASSY_lg_f8431ac0-519b-41ac-a92c-eb79588047be_1024x.jpg?v=1711579725)
Shimpo Assorted Die With Bolts for NRA-04/NVA-04S/NVS-07
$54.40 $68.00
SHIMPO Pugmill extruding dies are made of stainless steel and fit any NRA-04, NVA-04S, and NVS-07 pugmill. Contact your local dealer to order.
![Coneart Orton VentMaster](http://kruegerpottery.com/cdn/shop/products/coneart_ventmaster_1024x.jpg?v=1707845251)
Coneart Orton VentMaster
$586.50 $690.00
Orton Vent Master The Orton Vent Master vents the fumes directly from the kiln before they exit the kiln into the room. This is a very effective venting system which we highly recommend with every kiln. All Vent masters include the main blower and motor ,one three foot high temperature hose,one fume collector cup,hose clamps,instructions and t...
![Giffin Grip - 2 O-Rings and 3 Shims](http://kruegerpottery.com/cdn/shop/products/Giffin_Tec-OR2S3_1024x.jpg?v=1666366094)
Giffin Grip - 2 O-Rings and 3 Shims
$3.50
2 O-rings for securing top and bottom plates together. Plus 3 shims to increase tightness between the plates. (Not for use with the Giffin Grip Mini)
![Giffin Grip - Giffin Grip Carrying Bag](http://kruegerpottery.com/cdn/shop/products/Giffin_Tec-GGB1_1024x.jpg?v=1666366081)
Giffin Grip - Giffin Grip Carrying Bag
$29.95
Awesome canvas carrying bag for your Giffin Grip and accessories. Has one inside zipper pocket, one outside pocket, and a zipper closure. Made by Enviro Tote, an ecologically aware, women-run business. You can take your Giffin Grip anywhere! Or anything else you want to carry!
![Shimpo Coil Die With Bolts for NRA-04/NVA-04S/NVS-07](http://kruegerpottery.com/cdn/shop/files/P-DIE-CYL-ASS_lg_2731049a-ff29-49c0-8c86-e6bbf6290baa_1024x.jpg?v=1711579728)
Shimpo Coil Die With Bolts for NRA-04/NVA-04S/NVS-07
$54.40 $68.00
SHIMPO Pugmill extruding dies are made of stainless steel and fit any NRA-04, NVA-04S, and NVS-07 pugmill. Contact your local dealer to order.
![Coneart Lid Safety Switch](http://kruegerpottery.com/cdn/shop/products/image_placeholder_lg_fa5dd2af-6b7b-4c2b-bdfb-c3c62d7e3dc0_1024x.jpg?v=1707845255)
Coneart Lid Safety Switch
$136.00 $160.00
This safety switch cuts off the relays when the lid is open. This item is available only for purcahse as an upgrade with a new kiln.
![CS and Fusion 14, 16 and 19 Double Bead Doors](http://kruegerpottery.com/cdn/shop/products/paragon_fusion_double_bead_d300c1a7-dd3f-4c67-b2c5-320a32bc6ecf_1024x.jpg?v=1665417685)
CS and Fusion 14, 16 and 19 Double Bead Doors
$63.53 $70.59
CS and Fusion 14, 16 and 19 Double Bead DoorsAnneal glass beads in your kiln with the optional double bead doors. They come complete with a bead mandrel holder. CS and Fusion 14: 2" x 5 3/8" doors CS and Fusion 16: 2" x 6 3/8" doors CS and Fusion 19: 2" x 7 7/8" doors Note: The kiln may fire a little slower when equipped with the bead doors.
![Plastic Spigot](http://kruegerpottery.com/cdn/shop/products/1050088_lg_1024x.jpg?v=1701355709)
Plastic Spigot
$5.85
Plastic Spigot
![Soap Pump – White Collar](http://kruegerpottery.com/cdn/shop/products/SOAP_PUMP_COL_lg_cfb05e06-46fd-48d7-8e94-179dce939700_1024x.jpg?v=1701355705)
Soap Pump – White Collar
$0.30
Use collars with D1 Pumps. Available in White, Tan, and Black. Total Height: 7/16" Collar Height: 3/8" Lip Diameter: 1 1/4" Thread Diameter: 1"
![Soap Pump – Tan Collar](http://kruegerpottery.com/cdn/shop/products/SOAP_PUMP_COL_lg_26f8e446-29c0-4033-b693-45f0e53e1038_1024x.jpg?v=1701355703)
Soap Pump – Tan Collar
$0.30
Use collars with D1 Pumps. Available in White, Tan, and Black. Total Height: 7/16" Collar Height: 3/8" Lip Diameter: 1 1/4" Thread Diameter: 1"
![Bound English Oval Teapot Handle](http://kruegerpottery.com/cdn/shop/products/chob_lg_58af0873-8627-489d-b7ec-7d78a1cea6e4_1024x.jpg?v=1701356117)
Bound English Oval Teapot Handle
$12.00
4” English Bound Oval Teapot HandlePlease Note: Handle sizes may vary slightly since they are handmade. Handles can be soaked in warm water and bent slightly to fit as needed.
![Giffin Grip - Short Blue Wide Slider with Molded Pads, Set of 3](http://kruegerpottery.com/cdn/shop/products/Giffin_Tec-SBWS3_1024x.jpg?v=1666366106)
Giffin Grip - Short Blue Wide Slider with Molded Pads, Set of 3
$29.95
The Short Blue Wide Sliders offer a lower profile for trimming closer to the rim of your pot. They can replace the old Blue Wide Sliders that came with your original Giffin Grip purchase. (Not for use with the Giffin Grip Mini)
![Giffin Grip - 6" Rods with Molded Hands, Set of 3](http://kruegerpottery.com/cdn/shop/products/Giffin_Tec-RH63_1024x.jpg?v=1666366103)
Giffin Grip - 6" Rods with Molded Hands, Set of 3
$14.95
6 inch rods with attached hands. Compatible with all Giffin Grips. ( Not for use with the Giffin Grip Mini)
![Giffin Grip - 4" Rods with Molded Hands, Set of 3](http://kruegerpottery.com/cdn/shop/products/Giffin_Tec-RH43_1024x.jpg?v=1666366101)
Giffin Grip - 4" Rods with Molded Hands, Set of 3
$14.95
4 inch rods with attached hands. Compatible with all Giffin Grips. ( Not for use with the Giffin Grip Mini)
![Giffin Grip - Nuts and bolts](http://kruegerpottery.com/cdn/shop/products/Giffin_Tec-NBPKG1_1024x.jpg?v=1666366093)
Giffin Grip - Nuts and bolts
$1.79
The complete set of replacement nuts and bolts that you will need to attach the bottom brackets to your Giffin Grip. 2 plastic shims are thrown in to allow you to fine tune the tension between your top and bottom plate.
![Giffin Grip - Sliders for Jumbo Extender, Set of 3](http://kruegerpottery.com/cdn/shop/products/Giffin_Tec-JPES3_1024x.jpg?v=1666366088)
Giffin Grip - Sliders for Jumbo Extender, Set of 3
$29.95
Replacement Sliders for the Jumbo Platter Extender
![Giffin Grip - Molded Hands for grooved rods, Set of 3](http://kruegerpottery.com/cdn/shop/products/Giffin_Tec-HFR3_1024x.jpg?v=1666366087)
Giffin Grip - Molded Hands for grooved rods, Set of 3
$4.95
Set of 3 rubber hands. These are replacements for the newer rod extender hands and the pads on the bowl and tall sliders for our Giffin Grip Mini. Only sold in sets of 3.
![Giffin Grip - Blue Sliders Tuneup Kit, Model 10](http://kruegerpottery.com/cdn/shop/products/Giffin_Tec-BSTK10_1024x.jpg?v=1666366078)
Giffin Grip - Blue Sliders Tuneup Kit, Model 10
$49.95
For those who have older Giffin Grips and want to upgrade to the newer sliders. The kit includes one set of Blue Basic Sliders, one set of Blue Wide Sliders, a set of Improved Bottom Brackets, an extra o-ring & 2shims. ( Not for use with the Giffin Grip Mini )
![Fusion Fiber Lid](http://kruegerpottery.com/cdn/shop/products/paragon_fusion_fiber_739e63e4-2570-43f1-bb2f-81ae6abd3f00_1024x.jpg?v=1665417683)
Fusion Fiber Lid
$418.48 $464.98
Fusion Fiber LidThe Fusion-series glass kilns can be ordered with an optional ceramic fiber top in place of the firebrick top. Serious glass artists have long requested the fiber top for their firebrick kilns. The ceramic fiber lid includes a deluxe brushed stainless steel outer lid cover. (The photo shows the Fusion-8 but represents all Fusio...
![E-Series Bead Door](http://kruegerpottery.com/cdn/shop/products/paragon_bead_door_f7e467a9-f39a-441a-b235-dce11a388164_1024x.jpg?v=1665417675)
E-Series Bead Door
$63.53 $70.59
E-Series Bead DoorAdding the optional 2 1/2” x 6 1/2” bead door to your E-series is like buying two kilns instead of one. Not only can you fire enameling, glass, and ceramics, but with the bead door you can also anneal glass beads. Imagine the fun that this will add to your kiln. Comes complete with bead mandrel holder. Note: The kiln may not...