Skutt Feeder Wire Set – KM818, KM818-3

Quick Overview

Feeder Wires connect the elements to the terminal strip. Set includes wires, connectors and crimps.

Be the first to review this product

Availability: Stock Item - Usually Ships In 1 Day

  • OR

    Feeder Wire Set – KM818, KM818-3

    Double click on above image to view full picture

    Zoom Out
    Zoom In

    Product Description

    Krueger Pottery Supply Part Numbers
    Skutt Part Numbers

    Feeder wires are used to connect the element pigtails to the terminal strip. A new feeder wire set includes crimp on barrel connectors, wires, blue female tabs and labels for each wire that correspond to the terminal strip. Wires are also pre-stripped so all you need to do is crimp on the barrel connectors and attached them to your elements.

    If the white insulation on my feeder wires has turned brown do I need to replace them?

    If the insulation is slightly discolored, but still flexible, it does not need to be replaced. If the wire is brittle or stiff it should be replaced.

    Is it possible to remove a crimped on barrel connector?

    Possible, yes, but very difficult. As elements are fired they become increasingly brittle and any force applied to them can cause a break. If you need to remove a barrel connector, cut it in half horizontally so you are only working with half of it. After that you can carefully try to cut away enough metal from the connector to loosen it and carefully twist it off the element.

    Replacing Elements in All Kilns

    Additional Information

    SKU 1000143

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.