PC-60 Salt Buff Cone 6

Quick Overview

AMACO Potter's Choice glazes have rapidly become one of our most popular lines for potters, schools and hobbyists who want a reliable line of mid-fire cone 6 glaze that mimmick Cone 10 reduction in a Cone 6 electric kiln. 

Be the first to review this product

Availability: See Options Below

Product Name Price Qty
PC-60 Salt Buff Cone 6 – Pint
(Stock Item - Usually Ships In 1 Day)
$10.65
PC-60 Salt Buff Cone 6 – Gallon
(Special Order - Usually Ships in 3-5 Days)
$53.50
PC-60 Salt Buff Cone 6 – 25 lbs. Dry
(Special Order - Usually Ships in 3-5 Days)
$150.00

OR

PC-60 Salt Buff Cone 6

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Product Description

AMACO PC-60 Potter's Choice Salt Buff

AMACO Potter's Choice glazes have rapidly become one of our most popular lines for potters schools and hobbyists. These glazes are the perfect choice for those who want a reliable line of mid-fire cone 6 glazes that mimmic Cone 10 reduction in a Cone 6 electric kiln. 

  • Mimic the look of Cone 10 reduction at Cone 6 oxidation (electric)
  • Availble in pints or gallons for brushing and 25lb pails dry for dipping
  • All colors are designed for layering so an almost infinite number of combinations is possible
  • Compatible with virtually any Cone 6 clay bodies
  • Most colors are certified AP Non-Toxic and food safe (see individual color pages or glaze label for specific color information)
  • Well tested and reliable
     
AP Seal The ACMI AP (Approved Product) Seal shows that the product is certified to be safe for use by children grades K-6. Potential misuses of the product (such as ingesting the material) are taken into account.
     
Dinnerware Safe Dinnerware Safe glazes contain no lead or raw cadmium bearing ingredients.

Note: In order for glazes to be dinnerware safe, they must be fired to recommended firing temperature. Glaze products are not suitable for ingestion or inhalation.

   
 
Safe for Spraying SPRAYING/AIRBRUSHING: Make sure to use only AP Non-Toxic sprayable glazes for spraying and take the necessary ventilation precautions. We recommend the use of a respirator mask that is suitable for mist and dust when spraying glazes.

For more information on safe glaze spraying take a look at this page from Amaco

     

 

Liquid Brushing Directions

DIRECTIONS: Shake well before use. Thin with water and AMACO® Gum Solution if needed. Apply 3 coats of glaze to Cone 04 bisque. (Let the glaze dry between coats.) Glaze fire to Cone 5-6.

Salt Buff is a satin finish glaze that requires differences in thickness to create the various color shades. (Thick areas are dark olive green and thin areas are light amber.) On smooth surfaces, an uneven application is needed.

PC-60 Salt Buff simulates salt glazing. Standard salt glazing special effects depend on the location of the piece in the kiln and the amount of salt it receives or where the gas flame touches it etc. However for the PC series, a controlled application by applying PC-60 Salt Buff thinly, no more than two irregular coats to achieve the random effects of salt glazing.


 

Dry Dipping Directions and Warning

MIXING INSTRUCTIONS: Do not produce dust. Wear a NIOSH approved mask for dust or mist. Do not empty glaze powder into another container. Add water gradually into the bucket, stirring slowly. The glaze level will drop in the bucket as you mix in the water, allowing for more water additions until a creamy consistency is achieved. To insure a homogenous mixture, use a glaze mixer attached to a hand drill. Mix for at least half an hour. Although every glaze formula will have its own special water requirements, a basic recipe is to add 3 1/3 gallons of water to 25 pounds of dry glaze. Add a little more water if needed. One pound of AMACO® dry glaze will make approximately one pint of liquid glaze. Try not to let the glaze become thinner than needed, since the lower the viscosity, the greater the chance that heavy glaze particles will settle out. AMACO® glazes have a sufficient suspending agent to prevent settling unless an excessive amount of water is added. Store prepared glazes in their own airtight buckets.

DIRECTIONS: Stir well before using. If it is too thick, add some water very cautiously until it has the consistency of thin cream (dipping consistency). Dip the Cone 04 (1940°F, 1060°C) bisque fired piece into the glaze, lift it out and turn it over, allowing the excess glaze to pour out. The glaze will stop running as soon as it is lifted out of the bucket. Application is uniform and there is no waiting for it to drip or dry. Fire to witness Cone 5-6.

Request Material Safety Data Sheets when using in manufacturing. Tableware producers must test all finished ware to establish dinnerware status, due to possible variations in firing temperature and contamination.

WARNING: This product contains a material known to the State of California to cause cancer.


 

Application

PC-60 Salt Buff is an “Odds and Ends Glaze”. These glazes do not really fit into any category. Salt Buff likes to be put on irregularly with between 2 and 3 coats. This property gives it a beautiful look around texture as the pooling of the glaze essentially creates its own irregular coverage.

AMACO PC60 Glaze Thickness



Layering with PC-60 Salt Buff

A layering chart is not yet available for PC60.

 



PC-60 Salt Buff Temperature/Color Variation at Cone 10

This chip shows how PC-60 Salt Buff looks when fired to Cone 10 on AMACO® 38-M White Stoneware Clay. Please note: this glaze has not been tested for dinnerware safety at Cone 10. Tableware producers must have all finished ware tested and approved as safe for dinnerware through a certified laboratory.

AMACO PC60 Cone 10



Download the AMACO Potters Choice Glaze Catalog

Click the image below to download the catalog in PDF format.

AMACO Potters Choice Glaze Catalog


 

Download the AMACO Potters Choice Application Guide

Click the image below to download the guide in PDF format.

AMACO Potters Choice Glaze Aplication Guide

Additional Information

SKU PC60

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.