|
|
Why get an internal kiln vent?
Removes fumes, odors, vapors.
The internal venting systems draw out firing odors and vents them outdoors before they enter the studio or classroom's atmosphere. It’s great for firing lusters, metallics and high sulfur clays.
Improved firing consistency.
The internal venting system creates a down draft effect which greatly improves kiln temperature uniformity. You can now fire loads with reds at the top of the kiln and greens on the bottom with excellent results.
Ideal for automatic kilns.
The internal kiln venting system makes firing kilns much more convenient. There's no lid propping. Just put plugs in all the peepholes and press Start.
Better than hoods.
The internal kiln venting system pulls fumes from the kiln before they can enter the room. It's compact and unobtrusive--no pulleys, no counterweights, no overhead installation. Flexible ducting lets you move kilns around the room. And the air-cooled motor will not overheat from normal firings.
Specifications
Motor: 120 volt 1.4 amps
Heat exiting blower: 160° F maximum
Static pressure: Distances greater than 60 ft: Use 4 inch ducting
Blower: 140 cfm
Maximum kiln capacity for use with EnviroVent2: 12 cubic feet
(24 cubic feet with additional plenum cup kit)
UL and c-UL Listed for use with Skutt Kilns
Envirovent2 Package Includes
- Blower Motor w/6ft. Power Cord w/ Inline Switch
- 8" x 12" Mounting Plate
- 8ft. x 3" Flexible Aluminum Duct
- Spring Loaded Plenum Cup Assembly
- Operating Manual
- 3" to 4" Connector
- Mounting Hardware
- Floor Mount Kit
Price: $415.00
|
Skutt Envirovent2
$373.50 |
Optional Kit To
Vent a Second Kiln $108 |
Orton Ventmaster
Universal Unit - Fits All Kilns
No vibration transferred from blower to kiln
Capable of venting two kilns simultaneously
Non-corrosive blower housing
Efficient removal of kiln gases
Simple to install
ETL/CE Certified
Click here
to download th Orton Ventmaser Brochure as a PDF
|
Orton Ventmaster
MSRP: $395 Our Price: $355.50 |
Optional Kit To
Vent a Second Kiln $100 |
